ds26007 rev. a1-2 1 of 2 PR6001 - pr6005 www.diodes.com diodes incorporated features PR6001 - pr6005 6.0a fast recovery rectifier maximum ratings and electrical characteristics @ t a = 25 c unless otherwise specified diffused junction fast switching for high efficiency high current capability and low forward voltage drop surge overload rating to 300a peak low reverse leakage current plastic material: ul flammability classification rating 94v-0 mechanical data case: molded plastic terminals: plated leads solderable per mil-std-202, method 208 polarity: cathode band marking: type number weight: 2.1 grams (approx.) single phase, half wave, 60hz, resistive or inductive load. for capacitive load, derate current by 20%. characteristic symbol pr 6001 pr 6002 pr 6003 pr 6004 pr 6005 unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v r 50 100 200 400 600 v rms reverse voltage v r(rms) 35 70 140 280 420 v average rectified output current (note 1) @ t a = 60 c i o 6.0 a non-repetitive peak forward surge current 8.3ms single half sine-wave superimposed on rated load (jedec method) i fsm 300 a forward voltage @ i f = 6.0a v fm 1.2 v peak reverse current @ t a = 25 c at rated dc blocking voltage @ t a = 125 c i rm 10 150 a reverse recovery time (note 3) t rr 150 250 ns typical junction capacitance (note 2) c j 140 70 pf typical thermal resistance junction to ambient r ja 32 k/w operating and storage temperature range t j, t stg -65 to +150 c notes: 1. valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case. 2. measured at 1.0mhz and applied reverse voltage of 4.0 v dc. 3. measured with i f = 0.5a, i r = 1.0a, i rr = 0.25 a. see figure 5. a a b c d r-6 dim min max a 25.40 b 8.60 9.10 c 1.20 1.30 d 8.60 9.10 all dimensions in mm
ds26007 rev. a1-2 2 of 2 PR6001 - pr6005 www.diodes.com 0 2 4 6 8 0 25 50 75 100 125 150 175 i , average forward current (av) t , ambient temperature ( c) a fi g .1, t y pical forward current deratin g curve 0.1 1 10 100 1000 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 i , instantaneous forward current (a) f v , instantaneous forward voltage (v) f fi g .3, t y pical instantaneous forward characteristics 0 100 200 300 400 500 600 110100 i , peak forward surge current (a) fsm number of cycles at 60hz fi g . 2 max non-repetitive peak sur g e current 8.3ms single half sine-wave jedec method 1.0 10 100 1000 1.0 10 100 c , capacitance (pf) j v , reverse voltage (v) r fi g .4 t y pical junction capacitance PR6001 - pr6004 pr6005 t = 25 c j f= 1.0mhz 50v dc approx 50 w ni (non-inductive) oscilloscope (note 1) pulse generator (note 2) device under te s t t rr set time base for 50/100 ns/cm +0.5a 0a -0.25a -1.0a fi g . 5 reverse recover y time characteristic and test circuit (+) (+) (-) (-)
|
